Cisco CW9174I-RTG Wireless 9174I (Wi-Fi 7, 3 radio, 3 band, 4×4) Global

Part numbers

Cisco Wireless 9174 Series Access Points:

Software

Cisco IOS^® XE Software Release 17.18.2 or later

Cisco Meraki MR32.1.5 or later

Supported wireless LAN controllers

Catalyst and Cisco Wireless 9800 Series Wireless Controllers (physical or virtual)

Catalyst 9000 switches with Embedded Wireless Controller in SD-Access mode

802.11be

4×4 uplink/downlink multiuser Multiple-Input Multiple Output (MU-MIMO) with four spatial streams (5 GHz, and 6 GHz), 2×2 with two spatial streams (2.4 GHz) (or)

4×4 uplink/downlink MU-MIMO with four spatial streams (2.4 GHz and 5 GHz)

4096 QAM

Multilink operation

Preamble puncturing

Uplink/downlink OFDMA

Target Wake Time (TWT)

BSS coloring

Maximal Ratio Combining (MRC)

20-, 40-, 80-, 160-, and 320-MHz channels (6 GHz)

20-, 40-, 80-, and 160-MHz channels (5 GHz)

20-MHz channels (2.4 GHz)

PHY data rates up to ~17.5 Gbps (4×4 320 MHz on 6 GHz, 4×4 160 MHz on 5 GHz, and 2×2 20 MHz on 2.4 GHz) or PHY data rates up to ~6.5 Gbps (4×4 160 MHz on 5 GHz, 4×4 20 MHz on 2.4 GHz)

Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)

802.11 Dynamic Frequency Selection (DFS)

Cyclic Shift Diversity (CSD) support

Wi-Fi Protected Access 3 (WPA3) support

802.11ax

4×4 uplink/downlink MU-MIMO with four spatial streams (5 GHz, and 6 GHz), 2×2 with two spatial streams (2.4 GHz) (or)

4×4 uplink/downlink MU-MIMO with four spatial streams (2.4 GHz and 5 GHz)

Uplink/downlink OFDMA

1024 QAM

TWT

BSS coloring

MRC

802.11ax beamforming

20-, 40-, 80-, and 160-MHz channels (5 and 6-GHz)

20-MHz channels (2.4-GHz)

PHY data rates up to ~10 Gbps (4×4 160 MHz on 6 GHz, 4×4 160 MHz on 5 GHz, and 2×2 20 MHz on 2.4 GHz) or PHY data rates up to 5.4 Gbps (4×4 160 MHz on 5 GHz, 4×4 20 MHz on 2.4 GHz)

Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)

802.11 DFS

CSD support

WPA2/WPA3 support

802.11ac

802.11n version 2.0 (and related) capabilities

Integrated antenna

Cisco Wireless 9174I

External Antenna

Cisco Wireless 9174E

Interfaces

Incorporated radios

Indicators

Dimensions
(W x L x H)

◦    8.9 x 8.9 x 1.95 in. (22.6 x 22.6 x 4.9 cm)

◦    8.9 x 8.9 x 1.95 in. (22.6 x 22.6 x 4.9 cm)

Weight

Cisco Wireless 9174I

Cisco Wireless 9174E

Input power

CW9174I

Power source

2.4-GHz radio

5-GHz radio

6-GHz radio

Link speed

USB

Max PoE requirement at PD

802.3bt (Class 5) (UPOE) or DC power

2×2

4×4

4×4

1x 5G

Y (9W)

37W

802.3bt (Class 5) (UPOE) or DC power

4×4

4×4

–

1x 5G

Y (9W)

32W

802.3at (PoE+)

2×2

4×4

4×4

1x 2.5G

Y (2.5W)

25.5W

802.3at (PoE+)

4×4

4×4

–

1x 2.5G

Y (2.5W)

25.5W

802.3af (PoE)

1×1

–

–

1x 1G

N

13.95W

CW9174E

Power source

2.4-GHz radio

5-GHz radio

6-GHz radio

Link speed

USB

Max PoE requirement at PD

802.3bt (Class 5) (UPOE) or DC power

2×2

4×4

4×4

1x 5G

Y (9W)

37W

802.3bt (Class 5) (UPOE) or DC power

4×4

4×4

–

1x 5G

Y (9W)

32W

802.3at (PoE+)

2×2

4×4

4×4

1x 2.5G

Y (2.5W)

25.5W

802.3at (PoE+)

4×4

4×4

–

1x 2.5G

Y (2.5W)

25.5W

802.3af (PoE)

1×1

–

–

1x 1G

N

13.95W

Power consumption

CW9174I

Power source

Idle

Typical

802.3at (POE+)

12.4W ± 2W

15.9W

Note: Actual power consumption may vary depending on access point usage. Typical power consumption assumes the access point is passing traffic* during typical business hours and is idle during off-business hours. Business hours are assumed to be 11 hours a day, 6 days a week.

^* Test conditions:

(PoE): The 6-GHz and 5-GHz bands both operating at 160 MHz passing 200 Mbps per band of download traffic and the 2.4-GHz band operating at 20 MHz passing 50 Mbps of download traffic; USB disabled; 2.5G Ethernet port; ambient temperature 25˚C (77°F).

CW9174E

Power source

Idle

Typical

802.3at (POE+)

12.6W

17.6W

Note: Actual power consumption may vary depending on access point usage. Typical power consumption assumes the access point is passing traffic* during typical business hours and is idle during off-business hours. Business hours are assumed to be 11 hours a day, 6 days a week.

(PoE): The 6-GHz and 5-GHz bands both operating at 160 MHz passing 200 Mbps per band of download traffic and the 2.4-GHz band operating at 20 MHz passing 50 Mbps of download traffic; USB disabled; 2.5G Ethernet port; ambient temperature 25˚C (77°F).

Environmental

Cisco Wireless 9174I

Cisco Wireless 9174E

Available transmit power settings

Cisco Wireless 9174I

2.4 GHz

5 GHz

6 GHz

4×4:

2×2:

Note: In countries where use of the 6-GHz band is not allowed or there is no current software support, the 6-GHz radio will be disabled. The radio may be enabled with future software once the product is certified to operate in 6 GHz for that country.

Cisco Wireless 9174E

2.4 GHz

5 GHz

6 GHz

4×4:

2×2:

Note: In countries where use of the 6-GHz band is not allowed or there is no current software support, the 6-GHz radio will be disabled. The radio may be enabled with future software once the product is certified to operate in 6 GHz for that country.

Compliance standards

◦    IEC 60950-1 / IEC 62368-1 Ed.3 (with Ed.2 Deviation annex)

◦    EN 60950-1 / EN 62368-1 Ed.3 (with Ed.2 Deviation annex)

◦    UL 60950-1 / UL62368-1 3rd (with Ed.2 Deviation annex)

◦    CAN/CSA-C22.2 No. 60950-1 / CAN/CSA-C22.2 No. 62368-1 3rd (with Ed.2 Deviation annex)

◦    AS/NZS60950.1 / AS/NZS62368.1 Ed.3 (with Ed.2 Deviation annex)

◦    UL 2043

◦    Class III equipment

◦    CISPR 32 (rev. 2015) +AMD1:2019

◦    EN 55032:2015/A11:2020

◦    EN IEC 61000-3-2:2019/A1:2021

◦    EN 61000-3-3:2013+A1:2019

◦    AS/NZS CISPR32: 2015+AMD1:2020

◦    47 CFR FCC Part 15B

◦    ICES-003 (Issue 7, Class B)

◦    VCCI-CISPR 32:2016

◦    CNS 13438:2006 (95)

◦    KS C 9832:2019

◦    QCVN 118:2018/BTTTT

◦    EN 55035:2017+A11:2020

◦    KS C 9835:2019

◦    EN 301 489-1 V2.2.3 (2019-11)

◦    EN 301 489-17 V3.2.4 (2020-09)

◦    QCVN (18:2014)

◦    QCVN 112:2017/BTTTT

◦    KS X 3124:2020

◦    KS X 3126:2020

◦    EN 61000-6-1:2019

◦    EN 60601-1-2:2015+A1:2021

◦    EN 300 328 (v2.2.2)

◦    EN 301 893 (v2.1.1)

◦    EN 303 687 (v0.0.14, draft)

◦    AS/NZS 4268 (rev. 2017)

◦    47 CFR FCC Part 15C, 15.247, 15.407

◦    RSP-100

◦    RSS-GEN

◦    RSS-247

◦    LP0002 (109)

◦    Japan Std. 66, and Std. 71

◦    EN 50385:2017

◦    AS/NZS 2772 (rev. 2016)

◦    47 CFR Part 2.1091

◦    RSS-102

◦    IEEE standards:

◦    IEEE 802.3

◦    IEEE 802.3ab

◦    IEEE 802.3af/at

◦    IEEE 802.11a/b/g/n/ac/ax/be

◦    IEEE 802.11h, 802.11d

◦    802.11i (WPA2, WPA3)

◦    802.1x/802.1x – SHA256

◦    Enhanced Open/OWE

◦    Advanced Encryption Standard (AES) – GCMP128, GCMP256 and CCMP256

◦    EAP-Transport Layer Security (TLS)

◦    EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol (MSCHAP) v2

◦    Protected EAP (PEAP) v0 or EAP-MSCHAP v2

◦    EAP-Flexible Authentication via Secure Tunneling (EAP-FAST)

◦    PEAP v1 or EAP-Generic Token Card (GTC)

◦    EAP-Subscriber Identity Module (SIM)

Certifications